Signal
WhatsApp
技術支援:852-9736 0005
首頁»產品介紹»3D金屬打印機ETEC
產品

ETEC offers a variety of 3D printing systems with the ability to mass produce polymer parts with the speed and quality needed for demanding end-use applications

優勢


24/7 production of small, ultra-high resolution end-use parts

The P4K is the opposite of other, one-size-fits-all 3D printing solutions. With a range of models available, users can choose their optical configuration based on part size, feature-size requirements and throughput, and tailor a solution that best suits their needs. With resolutions of between 23µm-90µm on the X and Y axes, the P4K can easily produce detailed parts in a range of sizes.

Designed for a 24/7 production environment, the P4K can run lights-out, with little to no user intervention required. Easily print parts at volume with the quality, surface finish and tolerances needed for end-use applications

P4K Key features

Multiple high-resolution options

With resolutions of between 23µm-90µm on the X and Y axes, the P4K can easily produce detailed parts in sizes ranging from just 2mm – smaller than two grains of sand – to 230mm – about the size of 3 credit cards stacked end to end.

The P4K comes in four distinct models, each utilizing a 4K projector. Distributing these pixels across four differently-sized build plates allows for four different native pixel sizes (XY resolution); 35,62,75, and 90 um.

MADE POSSIBLE BY:

Four different model resolutions

Industrial DLP chips

Custom-designed optics



Designed for 24/7 production

The P4K allows you to take control of your manufacturing workflow with automated job queuing, managed by an onboard processor and hard drive, and automated job completion alerts to help minimize printer downtime. To further limit downtime, the build plate can be quickly swapped, allowing a new job to be started minutes after a print is completed.

MADE POSSIBLE BY:

Automated job queueing

Easy job turn over

Remote-managed enterprise software

Excellent reliability



Easy to use

User-friendly Envision One RP software automates all parts of the printing process, including support generation and part orientation, while a fully-integrated file repair tool patches mesh holes and readies parts for print. Easy, over-the-air updates for both software and firmware ensure users have access to the most up-to-date tools and print processes.

Easy material changes in less than two minutes allow users to produce a wide variety of parts with properties tailored to different applications, and excess material can be stored for months, helping users achieve further cost efficiencies.

MADE POSSIBLE BY:

Intuitive software

Under two-minute material changeover

Designed for serviceability




RC Series

Hard plastic

Ceramic-filled, high-temperature resins for tough and stiff parts at extremely high resolutions.

MATERIAL PROPERTIES

VALUES

Tensile Strength

39 MPa

Elongation at Break

2.90%

Heat Deflection Temperature

at 0.455 MPa 93° C

KEY FEATURES

Great for painting and plating

Extremely high print detail and resolution

Ceramic particles allow for excellent surface finish


HARD PLASTIC

High flexural modulus and strength for producing extremely tough parts

MATERIAL PROPERTIES

VALUES

Tensile Strength

67.5 MPa

Tensile Modulus

1340 MPa

Elongation at Break

16%

Impact Strength (Notched)

20 J/m

Heat Deflection Temperature

at 1.82 MPa 58° C

KEY FEATURES

High flexural modulus

Hydrophobic

High impact resistance

Great surface finish



HIGH TEMP

Molding material designed for high-temperature and high-pressure applications

MATERIAL PROPERTIES

VALUES

Tensile Strength

56 MPa

Flexural Modulus

3350 MPa

Elongation at Failure

3.50%

Heat Deflection Temperature

at 0.455 MPa 140°C

 KEY FEATURES

Heat deflection of 140°C straight of out the machine

High stiffness

Able to be vulcanized in rubber

CASTABLE

Castable material with the highest wax content available in 3D printing

MATERIAL PROPERTIES

VALUES

Viscosity

200 cP at 30°C

Density

1.08 g/cm^3 at 25°C

Color

Yellow

KEY FEATURES

Highest wax content available for 3D printing

Great for small and large features

No ash content


下載
應用
x

ɨһɨ